Ikan MR7 User Manual

Recording Monitor Model : MR-7 Operating Instructions

10/51 3-2. Rear 1) DC power input terminal It supplies DC power. Please check DC rated input voltage. For DC Adaptor, it can be used from about

11/51 6) HDMI to SDI Converter Output Terminal (BNC) Converts HDMI input signal to SDI and displays converted SDI signal. 7) HDMI INPUT TERMINAL (HDM

12/51 3-4. Function Assignment for F1, F2 17 assignable functions are in the System section of OSD Menu. User Defined Functions: ● ALM (Audio Level

13/51 4. STATUS DISPLAY A function displayed on screen that checks the operating status of the monitor. Some of the functions may not be displayed a

14/51 1) VU Level Meter Display Can be turned On or Off in the Audio MENU configuration, or assigned to the function keys on the front.

15/51 5. CONFIGURATION MENU 1. Press the MENU button and CONFIG menu will be shown. 2. Move to items to configure or change using UP (CW) ▲ or DOWN

16/51 5-1. VIDEO ▪ Brightness: Adjusts the perceived emitted/reflected light. ▪ Contrast: Adjusts perceived lightness/darkness. ▪ Chroma (HUE): Ad

17/51 Signals supported on SDI 3G Mode are as follow: (SMPTE-425M) ▶ A_MS1_YCbCr422_10 : 3G SDI Level-A Mapping Structure 1 – YCbCr 4:2:2/10

18/51 5-2. DISPLAY 1 ▪ Aspect Switches the screen between 16:9, Fill, Native Ratio (original ratio) for Format input. The aspect will not be cha

19/51 ▪ Waveform Intensity : Sets waveform display color strength between 0~63. ▪ WFM & Vector Size : Waveform & Vector size is select

2/51 Safety Instructions ● Keep monitor away from heat. ● Do not use the monitor in water or under conditions with high humidity or excessive dust.

20/51 5-3. DISPLAY 2 ▪ Video Range Check (for SDI only) Displays the area out of Y, Cb, or Cr range that user set. It is useful to check over-expos

21/51 ▪ Focus Peaking Display: Highlights the edge of objects for sharp focus. ▪ Peaking Color: Configures the color of highlighted edge. Blue, Gr

22/51 5-4. DISPLAY 3 ▪ False Color: Checks the luminance and display different colors for each exposure level. This helps users checking over-expos

23/51 ▪ Level Meter: Horizontal/vertical angle in degrees is displayed to help position the monitor. . ▪ Auto Flip: The screen automatically

24/51 5-5. Color ▪ Color Temperature: Configures color temperature of the screen or White Balance. There are 6, such as: VAR, 3200°K, 5400°K, 6500°

25/51 5-6. MARKER ▪ Marker Ratio: Selects Marker. Selectable Markers: 4:3, 4:3 on-air, 16:9, 15:9, 14:9, 13:9, 1.85:1, 2.35:1, User1, User2, User3,

26/51 ▪ User Marker H2: Sets the right location of vertical direction of the Marker ▪ User Marker 1: Sets the t

27/51 5-7. OSD ▪ Timecode Display Configures whether or not to display TC (Time Code) Data embedded in HD/SD-SDI signal entered on the monitor scre

28/51 The Monitor Recognizes LTC in HANC, VITC1 in HANC , VITC2 in HANC, DVITC (SD-SDI). ① LTC (Lo

29/51 ▪ OSD Display Time Configures display time (sec) of MENU and displayed on the screen. The configuration is available from 0 (Continue) to 60 sec

3/51 power down the unit. Then, contact ikan immediately. ● Do not disassemble or modify the monitor, it may cause fire, electric shock and other dam

30/51 ▪ REC Auto Mode Slave Record for SDI only Select On to record (automatically) When timecode starts and stops. Select Off to record regardless of

31/51 5-8. AUDIO ▪ VU Level Meter: Turns On/Off display of Embedded Audio signal of SDI input as Level Bar on screen. ▪ Level Meter Type: Pair or

32/51 5-9. GPI ▪ GPI Control: Configures on/off of external control terminal. If turned off, it cannot be controlled from the outside through the

33/51 5-10. SYSTEM ▪ Function 1, 2 : It designates the functions on F1, F2, buttons on the front. For details, refer to the table in section 3-4.

34/51 ▪ Firmware Version: Firmware Version. Example) 0.20.17 ▪ Operating Time : The time monitor has been operated. Turn

35/51 6. REC MODE * Recording mode is not executable right after startup. Please wait until ‘Loading Recorder’ message is disappeared and ‘Ready to

36/51 6-1-1. REC Display 1) A recorded file name is displayed, and the configuration of file name is available on MENU -> AUDIO -> REC Date &

37/51 6-1-2. Manual Recording ▪ Press the REC button to start recording when you see live video. The video and the audio is recorded togeather. ▪

38/51 6-2. PLAYBACK LIST Press the List/Del button for 3 seconds to see the list of recorded video clips. ▪ Select Internal or External SD using k

39/51 6-3. Play Screen ▪ You can see the play screen when you press knob on a file. ▪ Turn the knob left or right for fast forward/backward play

4/51 Thank you for purchasing an ikan monitor. Please read the instruction manual before installation or use of the monitor. Please contact our servi

40/51 7. Remote Terminal Assignment 7-1. Remote Terminal (RJ-45) Assignment Functions of each terminal can be designated on GPI CONTROL configurat

41/51 7-3. Remote Terminal Assignment (GPI Port) Port Assignment Items Function SDI Input Switches the input SDI-1 HDMI Input Switches

42/51 8. Program Update Port Instruction SERIAL PORT is Mini USB Jack type. It can be used : 1) To update Firmware 2) To measure or adj

43/51 9. List of Compatible Signal formats( HDMI/COMPOSITE) NO Signal Input Formats INPUT OUTPUT Composite HDMI HDMI to SDI (Convert) Normal Conv

44/51 9-1. List of Compatible Signal formats (SDI) NO Input Signal Formats HD/SD-SDI Single 3G YUV4:2:2 3G YUV4:4:4 3G RGB444 1 NTSC

45/51 10 Specifications ITEM RM-071SC Input 1 x SDI BNC port for HD/SD-SDI, 3G/1.485G/270M 1 x Composite BNC port 1 x HDMI HDMI (with HDCP v

46/51 11. Dimensions 141 182 36 MODEL Unit W H D Remark MR-7 mm 182.0 141.0 36.0 without stand inches 7.2 5.5 2.4

47/51 12. Troubleshooting Please try solutions below if there is any problem with monitor. It is not monitor defectiveness if you can solve the proble

48/51 If colors are abnormal from the logo screen or missing some colors when turn on the monitor. - Reconnect the power code so that the monitor can

49/51 13. Maintenance The ikan Corporation warranties to the first end-user, that the product will, under normal use, be free from defects in workmans

5/51 10. Specifications • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 44 11. Dimensions • • • • • • • • • • • • • •• • • • • •

50/51 work normally. This phenomenon may occur if it’s overloaded temporarily during the internal image processing. 16. Directions for monitor insta

51/51 http://www.ikancorp.com ikan corp. 3903 Stoney Brook Houston, TX 77063 USA Tel : +1 713-272-8822

6/51 1. Monitor Overview The MR-7 Monitor supports video signals ranging from standard HD/SD-SDI , Composite and HDMI. This multi-format monitor is de

7/51 3. Monitor Body Description 3-1. Front 1) INPUT Press to change input signal. Input switches as follows: SDI -> CVBS -> HDMI WARN

8/51 User Zoom (adjustable by up/down knob), 5D Mark II Zoom. In some cases, the dot indicator for Zoom may not be shown on SDI 720p format. 4) WF/VS

9/51 13) DEL Delete a selected file. 14) Tally Light Red, Green, Amber 15) SEL.ALL Select all recorded clips on the list screen. 16) SEL Select